Ways to Reduce Flexo Printing Costs


Running a successful flexographic printing business means keeping an eye on profits. That means bringing in paying business, doing good work, and always finding ways to reduce flexo printing costs. Here are a few thoughts on how to effectively reduce costs in your flexo printing business.

-by Cutting Down on the Number of Times You Stop Your Press

The point is to reduce substrate waste because every time you start up the press needs to gain registration and there is material waste. More stops and starts take more time and increase overhead. Using a servo unit with an older press will allow the operator to maintain better control of the press run and reduce the number of adjustment stops, thereby reducing printing costs.

-by cutting down on the amount of substrate waste per press start/restart

Adding a servo unit to an existing press can reduce the length of substrate needed to gain register down to one press length, the absolute minimum for any press. Thus the press will waste less substrate with each startup and well as requiring fewer stops and starts for the job.

-by getting the job done faster overhead is reduced

As an example, the ability of a servo add on like the Servo 3000 allows a press to re-register the web on a pre-printed roll in order to add colors or to make design modifications. With the web re-registered by the Servo 3000 the press will be able to run the second or third pass at full press speed and maintain 0.0025 inch resolution throughout. Getting the job done faster means that the press can be used sooner for other profitable work.

-using high quality, long life doctor blades will allow the press to operate longer between blade changes

With a high quality, long life blade such as produced by Stripsteel of Australia a printer will typically see a fifty percent longer functional blade life. This effectively reduces the cost of doctor blades as the printer will use two thirds as many blades in a year. It will also reduce the down time required to change blades at each print station. Last, since using a high quality blade like the Swedish steel, specially coated, blade from Stripsteel will reduce the frequency of press stops for changing doctor blades it will reduce substrate loss associated with the subsequent startups.

-buy the Servo 3000 and add it to an existing press

The cost of a new high end servo press can easily run from $250,000 to $1,000,000. For a fraction of this cost a printer can add the easily attached Servo 3000 Digital Infeed + Re-register™ system to an existing flexographic press. The reduction in flexo printing costs experienced with the Servo 3000 will pay for the Servo 3000 a lot faster than for a new servo press. Then every cent of reduction in flexo printing costs will be clear profit.

Immobilienmakler Heidelberg

Makler Heidelberg

Immobilienmakler Heidelberg

Makler Heidelberg


Immobilienmakler Heidelberg

Makler Heidelberg


Der Immoblienmakler für Heidelberg Mannheim und Karlsruhe
Wir verkaufen für Verkäufer zu 100% kostenfrei
Schnell, zuverlässig und zum Höchstpreis


Source by Jim Walker

Guillotine Press Fitness Exercise


The guillotine bench press is a variation of the commonly performed bench-pressing exercise, with the barbell brought down to the neck opposed to the chest as with most other barbell pressing variations. The guillotine press is performed by those who believe the form of the exercise stimulates the chest to a greater degree than other pressing variations, or specifically targets the upper region of the chest (this has been supported by Milos Sarcev, a world famous professional bodybuilding trainer ).

We would expect the guillotine bp to target the same muscles as those recruited by the common bp exercise, specifically the chest, triceps and shoulders. The triceps involvement during the guillotine press would be argued to be less than when performing the normal benchpress due to the upper arms being perpendicular to the body. When targeting the chest, a grip which is shoulder width, or greater, would be recommended.

The guillotine benchpress would be ideally performed with a training partner due to safety reasons. The exercise may not be suitable for those with injurious shoulders, and those who are relatively new to training. Form is vital to ensure maximum effectiveness and safety, and the barbell should therefore remain in full control of the trainer, with a slow and controlled movement. The guillotine variation of the benchpress can only really be performed with a barbell, and therefore may not be a suitable choice for those with notable muscle imbalance. The bench-press performed with a set of dumbbells, with strict form, would be a more suitable exercise to perform for those with muscle imbalances due to the unilateral nature of dumbbell training.

The guillotine laying-press would likely be implemented into a bodybuilding style training routine to stress the chest fibres. Those who train for strength will not gain much benefit from performing the guillotine bp, with the form limiting the resistance which can be used. Bodybuilders may wish to integrate the exercise into a chest routine, performing between eight and twelve repetitions per set, with a management weight, and strict form.

Immobilienmakler Heidelberg

Makler Heidelberg

Immobilienmakler Heidelberg

Makler Heidelberg


Immobilienmakler Heidelberg

Makler Heidelberg


Der Immoblienmakler für Heidelberg Mannheim und Karlsruhe
Wir verkaufen für Verkäufer zu 100% kostenfrei
Schnell, zuverlässig und zum Höchstpreis


Source by Franky J Jones

My Heel Is Killing Me… It Hurts So Much… What Is It?


Heel pain is one of the most common painful conditions seen in an arthritis clinic. This article discusses the various types of problems that cause heel pain and what can be done to make the situation better.

It’s estimated that more than 1 million persons in the United States suffer from heel pain at any given time.

When a patient complains of heel pain, it must be clarified by history whether the pain is in the bottom of the heel or the back of the heel because the diagnosis and treatment are very different.

Pain in the bottom of the heel is often due to plantar fasciitis (PF). The plantar fascia is a tough band of tissue that begins at the medial (inside) part of the bottom of the heel and extends forward to attach at the ball of the foot. The fascia is responsible for maintaining the normal arch. When an excessive load is placed on the fascia, pain can develop at the origin (the heel) as well as the mid-portion (arch) of the fascia.

PF can develop in anyone but is more common in certain groups such as athletes, people older than 30 years of age, and obese individuals.

PF must be distinguished from other causes of bottom of the heel pain such as nerve entrapment, atrophy of the normal heel fat pad, stress fracture of the calcaneus (heel bone), rupture of the plantar fascia, bone cyst, bone tumor, and bone infection.

The history typically describes a gradual onset of symptoms with no prior trauma. The most telling symptom is severe pain in the bottom of the heel when taking the first morning step. Patients may report difficulty walking to the bath room. The pain tends to lessen with more walking. This “first step” pain is also present during the day if the patient has been sitting for awhile, then getting up to walk.

On exam, pain is noted with pressure applied to the medial bottom of the heel. Tenderness is worsened by pointing the toes and ankle toward the head. This is because the plantar fascia is being stretched. Pain in the arch may also be present.

One in older patients should be ruled out and that is heel pad atrophy. Normally the heel has a thick feeling to it. In older patients the heel pad may lose this thickness and flatten out. The pain is located more centrally.

Another “fooler” is entrapment of the lateral plantar nerve. Pain is felt in the medial heel but may be present at rest as well. There may be weakness spreading the toes.

Fracture of the calcaneus (heelbone) causes pain at rest that is worsened with walking. Tenderness is present along the sides of the heel. Magnetic resonance imaging (MRI) can confirm the presence if fracture.

But what about “bone spurs”? The presence of a bone spur by itself means nothing. They are very common and by themselves are not a cause of pain. Some patients with inflammatory forms of arthritis such as psoriatic arthritis, ankylosing spondylitis, or Reiter’s disease have a specific type of spur that should prompt further evaluation looking for systemic forms of arthritis.

Diagnostic studies such as ultrasound and magnetic resonance imaging can be used to confirm the presence of plantar fasciitis. Electromyography (EMG) may be needed to rule out lateral plantar nerve entrapment.

So how is this condition treated?

The first thing is to institute a stretching regimen. Most people with PF also have a shortened Achilles tendon and the ability to dorsiflex (point the toes up) is limited. The plantar fascia is continuous with the Achilles fascia. Stretching the plantar fascia and the Achilles decreases the tension in the plantar fascia and helps relieve inflammation.

A temporary reduction in activity is important in athletes, particularly runners. Cross training with swimming and cycling can help maintain cardiovascular fitness while sparing the plantar fascia from pounding. Runners should avoid hills and make sure that any foot abnormality be corrected with custom orthotics.

Ice massage with ice cubes applied to the plantar fascia can also be helpful.

Shoes with soft heels and inner soles can relieve discomfort. Rigid heel cups and arch supports are generally not recommended. The patient may gradually resume normal activities over an eight week period of time. Rushing rehabilitation is not advised.

If there is no improvement, a night splint which holds the ankle in 10 degrees of dorsiflexion prevents the shortening of the plantar fascia.

If the night splint fails or the pain does not lessen, injection of glucocorticoid (cortisone) using ultrasound guidance is recommended. Injections should be limited to a maximum of two given over four weeks.

Patients who do not get better need to be reevaluated for systemic disease or other conditions causing heel pain.

Surgery is the last resort. Transverse release of the plantar fascia is the procedure of choice. This can be done using arthroscopic guidance.

Pain in the back of the heel is an entirely different condition.

The major structure here is the Achilles tendon which extends down from the gastrocnemius muscle to attach at the rear of the calcaneus.

Inflammation of the Achilles tendon can occur, usually in athletes or in people in engage in overxuberant physical activity involving running or jumping. Patient who are overweight are also at risk. The pain is usually described as a soreness. There is localized swelling and tenderness. Ultrasound can be used to differentiate an inflamed Achilles tendon from one that is partially or fully torn. The treatment involves anti-inflammatory medicines, physical therapy, and stretching exercises. Glucocorticoid injection is not recommended because of the danger of weakening the Achilles tendon leading to rupture. Using a foam rubber lift to elevate the heel in a shoe can help with symptoms.

Achilles rupture is handled surgically and requires a long recuperation.

Haglund’s syndrome, which is a condition where a spur develops at the back of the calcaneus and is often associated with localized Achilles tendonitis can also cause pain in the back of the heel. Ill-fitting shoes are the most common cause. Typically a bump develops at the back of the heel. Because of its association with ill-fitting shoes, this is sometimes referred to as a “pump bump.” Physical therapy, anti-inflammatory medicines, and stretching can often be of benefit. Glucocorticoid injection should be sparingly employed because of the danger of Achilles rupture. Wearing proper fitting shoes are an obvious adjunctive treatment.

Bursitis involving the retrocalcaneal bursa (the small sack that lies between the Achilles tendon and the calcaneus is a cause of pain behind the heel. Treatment involves the use of physical therapy modalities such as ultrasound. Sometimes glucocorticoid injection may be needed. It is important to limit the injection to one because of the danger of possible weakening of the Achilles tendon leading to rupture. Ultrasound needle guidance is advised to ensure proper localization of the injection.

The diagnosis is made by history and physical examination. Both MRI and ultrasound can be used for confirmation.

Immobilienmakler Heidelberg

Makler Heidelberg

Immobilienmakler Heidelberg

Makler Heidelberg


Immobilienmakler Heidelberg

Makler Heidelberg


Der Immoblienmakler für Heidelberg Mannheim und Karlsruhe
Wir verkaufen für Verkäufer zu 100% kostenfrei
Schnell, zuverlässig und zum Höchstpreis


Source by Nathan Wei

Developing a Site Specific Safety Plan Template


It is important for site-specific or location based operations such as construction, engineering, surveying or mining to develop a site-specific safety plan, which can easily be based on a site-specific plan template for safety. Companies who haven’t drawn up their safety plan can use such a template as reference or guide. Business owners need to keep in mind though that a template is merely a starting point for developing their own unique safety plan. Each company would have its own unique circumstances dictated by its scope of work, its environment, number of employees, and many other factors.

Site-specific plans are important to operations such as mining, construction, surveying, real estate development, and the like because the conditions of the actual job site are unique and may not be similar to any other project that the company has undertaken in the past. Therefore, existing plans for safety may need to be adjusted or edited to suit new conditions. It is important for the business owners or for management to be on their toes and not to simply rely on a general, blanket plan that they may have been used to before.

A site-specific safety plan template is a good way to keep a standard safety document or manifesto on hand, which can be altered or customized as each new site-specific project comes along. The great thing these days is that the Internet is filled with available resource to help businesses come up with their own site-specific plans through the use of such templates. There are quite a number of informative and helpful websites on health, safety, occupational hazards, and related topics that offer templates or basic guide questions for companies to work on. These can serve as the initial take off points for companies to develop their own unique plans for their safety.

The good thing about referencing a such a template is that these would most usually already outline the standard best practices regarding safety and health, which are relevant across all industries and businesses. These would be considered universally standard or imperative safety rules and regulations. Moreover, these templates would outline the most basic or minimum standards that are in line with the requirements of local or city laws regarding safety, occupational hazards, and health. Therefore, utilizing templates such as a site-specific safety plan template is actually a great idea for businesses to save on time, effort and cost.

Immobilienmakler Heidelberg

Makler Heidelberg

Immobilienmakler Heidelberg

Makler Heidelberg


Immobilienmakler Heidelberg

Makler Heidelberg


Der Immoblienmakler für Heidelberg Mannheim und Karlsruhe
Wir verkaufen für Verkäufer zu 100% kostenfrei
Schnell, zuverlässig und zum Höchstpreis


Source by Gerry Walter

What is 3c certification



“3C” certification, that the “China Compulsory Product Certification”, the English name “ChinaCompulsoryCertificate”, the English abbreviation for the “CCC”, referred to as “3C”. As a national security certificate (CCEE), the import safety license system (CCIB), the Chinese EMC Certification (EMC) triple the “CCC” certification authority, is the AQSIQ and the State commission and an international practice advanced signs irreplaceable importance. Since May 1, 2003, China will officially 132 kinds of products in 19 categories Mandatory Certification, Home Appliances The first product under the compulsory certification of products. In the future, players must be designated by the state certified qualified certification body, awarded the certification body to obtain the mandatory product certification, and labeling compulsory product certification mark (referred to as “3C” sign) in order to be manufactured, imported and Sell Qualifications. CCIB certification and the Great Wall had been certified companies must be certified by 3C.

3C certification that is short for China Compulsory Product Certification. On the legal basis for compulsory product certification, product certification mandatory range of products, the use of compulsory product certification mark, mandatory product certification were unified supervision and management requirements. To sum up the main contents of the following areas:

(A) in accordance with the relevant WTO agreements and international conventions and national law concerning human health and safety, animal and plant life and health, and environmental protection and public safety products unified compulsory product certification system. Certification and Accreditation Administration of the uniform national mandatory product certification system for the management and organization of implementation.

(B) the national compulsory product certification system, the main characteristics of the state announced a unified directory, determine the uniform application of national standards, technical regulations and implementation procedures, formulate a unified symbol of identity, to establish uniform fees. Where the inclusion of compulsory product certification directory of products, must be designated by the National Certification of qualified certification bodies to obtain the relevant certificate and certification mark, the before entering, importing, marketing and business establishments in use.

(C) According to China’s WTO commitments and reflects the principle of national treatment, the original product covered by the two systems 138, the release of “directory” by deleting the original included in the mandatory certification of medical ultrasound diagnosis and management therapy equipment and other 16 kinds of products, an increase of 10 kinds of safety glass building products, the actual inclusion of “directory” of a total of 132 kinds of products compulsory certification.

(D) of the state compulsory product certification mark use of uniform. New national compulsory certification mark the name “China Compulsory Certification”, the English name “ChinaCompulsoryCertification”, initials can be referred to as “3C” sign. After the implementation of China Compulsory Certification mark will replace the original implementation of the “Great Wall” logo and “CCIB” mark.

(5) national unity to determine fees and mandatory product certification standards. New fees and charges will be developed in accordance with not-for-profit and reflect the principle of national treatment, considering the current charges, and to refer to the same certification fees and overseas fees.

(6) compulsory product certification system on August 1, 2002 come into operation, the certification body officially start accepting applications. The original product safety certification system and import safety license system since August 1, 2003 onwards abolished.

3C certification is actually the English name “ChinaCompulsoryCertification” (China Compulsory Product Certification System), in abbreviation, is the state compulsory product certification mark used in uniform. It is our government in accordance with the relevant WTO agreements and international rules to protect consumers and animal and plant life, personal safety, environmental protection, protection of national security, in accordance with laws and regulations to implement a product conformity assessment system. Its main features are: a unified national public directory, determine the uniform application of national standards, technical regulations and implementation procedures, formulate a unified symbol of identity, to establish uniform fees.
Immobilienmakler Heidelberg

Makler Heidelberg

Immobilienmakler Heidelberg

Makler Heidelberg


Immobilienmakler Heidelberg

Makler Heidelberg


Der Immoblienmakler für Heidelberg Mannheim und Karlsruhe
Wir verkaufen für Verkäufer zu 100% kostenfrei
Schnell, zuverlässig und zum Höchstpreis


Source by yaya

How to Search For a File in a Directory Using C # (C Sharp)


This article, which is mainly a code snippet, will show you how to search for a file in a given directory. As you can see in the main method the search name is “win” which is the file name we are looking for and the folder is “C: Program Files”. The SearchDirectories method takes these two parameters and does the actual searching.

using System;
using System.IO;
public class FileSearch {
public static void Main () {
// The name to search for
String searchName = “win”;
// The directory to search in.
DirectoryInfo myDir = new DirectoryInfo (@ “c: Program Files”);
SearchDirectories (myDir, searchName);
}

public static void SearchDirectories (DirectoryInfo dir, String target) {
FileInfo [] files = dir.GetFiles ();
foreach (FileInfo file in files) {
if (file.Name.IndexOf (target)> -1) {
Console.WriteLine (file.Name);
}
}

DirectoryInfo [] dirs = dir.GetDirectories ();
// Searching in the subdirectories as well.
foreach (DirectoryInfo subDir in dirs) {
SearchDirectories (subDir, target);
}

This method is recursive because it calls itself, making it very efficient for searching through directories. This is necessary since it also searches each sub directory in a directory. So if you have a folder inside of a folder it will search for all the files in that folder as well.

The result of running this program will just be an output of the file names because all were doing with the file is: Console.WriteLine (file.Name);

This could be changed to something different such as deleting or moving the files, making this program a very compact and powerful program that can make menial tasks take much less time.

Immobilienmakler Heidelberg

Makler Heidelberg

Immobilienmakler Heidelberg

Makler Heidelberg


Immobilienmakler Heidelberg

Makler Heidelberg


Der Immoblienmakler für Heidelberg Mannheim und Karlsruhe
Wir verkaufen für Verkäufer zu 100% kostenfrei
Schnell, zuverlässig und zum Höchstpreis


Source by Curtis M Larson

Two Creative Ways to Get Traffic to Your Adult Website


Are you trying to get traffic to your adult website? This is a common problem among adult webmasters. Why? Because not everyone is above the age of 18 and is into adult websites. This can make it very hard to receive the amounts of traffic that normal websites can receive. So what is an adult webmaster to do? No, you don’t give up. You find creative ways to promote your adult website.

The first creative method you can use to get traffic to your adult website is by launching an affiliate program. If you aren’t familiar with what an affiliate program is, you will basically be paying someone part of whatever product or service you are selling on your site. But wait, YOU are going to have to pay people when they refer others to purchase your service or product? It actually is a great way for you to pull in some extra money. Let’s say, for example, that you sell subscriptions to your adult site for $40. You will pay your affiliate 50% of subscription fees, meaning that even though you have to pay them $20, you are able to pocket $20 in profit.

Affiliate programs give you the option to have your visitors that love your site the ability to make money by referring their friends to your adult site. This will surely get you extra traffic to your adult site. If you’re interested in affiliate programs, you can just do a Google search for “affiliate program scripts”. There are many free scripts out there that you can upload to your site and start pocketing extra money today.

You may also want to consider starting an opt-in mailing list. This will allow new visitors to opt-in to a mailing list which you can then use to hopefully convert into a new subscriber or purchase your adult product. Having trouble getting opt-in subscribers? You may want to try offering a free bonus. This works wonders, and I’m sure you’ll see a large jump in subscribers if you implement a free bonus.

Immobilienmakler Heidelberg

Makler Heidelberg

Immobilienmakler Heidelberg

Makler Heidelberg


Immobilienmakler Heidelberg

Makler Heidelberg


Der Immoblienmakler für Heidelberg Mannheim und Karlsruhe
Wir verkaufen für Verkäufer zu 100% kostenfrei
Schnell, zuverlässig und zum Höchstpreis


Source by Andrew Kalsky

Logistics Management, Traffic, Distribution, and Transportation


DEFINITION:

Planning, implementing, and controlling efficient and effective flow and storage of goods and services from point of origin to point of consumption to conform to customer requirements.

LOGISTICS MANAGEMENT:

Managerial responsibility to design and administer a system to control the flow of material, work in process, and finished inventory to support business entity.

ACTIVITIES INVOLVED IN LOGISTICS:

* Customer Service

* DISTRIBUTION Communication

* Inventory Control

* Material Handling

* Order Processing

* Procurement

* Packaging

* Traffic & Transportation

* Warehousing & Storage

* Demand Forecasting

* Return Goods Handling

OBJECTIVES ACHIEVED THROUGH LOGISTICS MANAGEMENT:

* Rapid Response

This is concerned with a firm’s ability to satisfy customer service requirements in a timely manner.

* MINIMUM VARIANCE

Variance is an unexpected event that disrupts performance of the system.

* MINIMUM INVENTORY

To reduce and manage inventory to the lowest possible level while simultaneously achieving desired operation aim.

LOGISTICS VS SUPPLY CHAIN MANAGEMENT

* Logistics is typically considered as the sub-set of Supply Chain Management

* Supply Chain Management has ( 5 ) key functions:

Procure

Make

Move

Store

Service

Logistics is involved at various stages of supply chain; from supplier to plants, from plants to distribution centers, from distribution centers to stores, from stores to customers.

LOGISTIC MANAGEMENT

KEY LOGISTICS DECISIONS

1. How many plants and/or warehouses.

2. Where should the plants and/or warehouses be located

3. What merchandise volume each plant and/or warehouse have

4. Which plant should service which warehouse, and which warehouse should service which customers

FACTORS TO BE CONSIDERED FOR LOGISTICAL EXCELLENCE

* AVAILABILITY: This means having inventory to consistently meet needs of

Customer material or product requirement.

* OPERATIONAL PERFORMANCE:

Means time spent from order receipt to delivery. Measured in terms of how well the company can accommodate customers unusual requests.

*

SERVICE RELIABILITY:

Quality attributes of Logistics.

LOGISTICAL SUB-SYSTEMS

* Physical Supply

Management of flow of rawe materials, spare parts, machinery and tools from suppliers

* Physical Distribution

Management of finished goods from the factory to the customers

* Logistical Controls

Efficient co-ordination of physical supply and distribution sub-systems

PARTIES INVOLVED IN LOGISTICS

* Shippers

* Suppliers

* Carriers

* Warehouse providers

* Freight forwarders

* Terminal Operators

* Government

* Customers

Immobilienmakler Heidelberg

Makler Heidelberg

Immobilienmakler Heidelberg

Makler Heidelberg


Immobilienmakler Heidelberg

Makler Heidelberg


Der Immoblienmakler für Heidelberg Mannheim und Karlsruhe
Wir verkaufen für Verkäufer zu 100% kostenfrei
Schnell, zuverlässig und zum Höchstpreis


Source by John Ourian

Viral Infection Headache Symptoms


Caught a virus and starting to experience severe headaches? If you start to have severe viral infection headaches, then you should check them out. It will be a good idea to ensure that your symptoms do not point to a case of meningitis. There are serious consequences from having meningitis.

So what is meningitis all about? This is an infection in the membrane that surrounds your brain. Brain and spinal cord infections can be very dangerous because they cause inflammation, which places pressure on your nerves. This will cause you to have a viral infection headache.

Inflammation can also cause the following symptoms:
* Fever
* Severe headache
* Feeling confused

Severe inflammation can cause these symptoms:
* Brain damage
* Stroke
* Seizures
* Death

A bacterial infection or virus causes meningitis. The body can usually fight and beat an infection. However, when the infection travels into the blood stream, it can then go into your brain and spinal cord fluid. It can then affect your nerves and move into the brain causing inflammation and swelling. This can damage or kill nerve cells and cause bleeding in the brain. It can also cause you to have a viral infection headache.

Brain swelling is very dangerous because the brain is a soft organ in a hard box (the skull). If the brain swells, there is nowhere for it to go, except against the walls of the skull. This is what causes the most damage.

There are several causes of meningitis. These include
* Bacterial infection
* Viral infection
* Fungal infection
* A reaction to medications
* A reaction to medical treatments
* Lupus
* Some forms of cancer
* A trauma to the head or back

Bacterial meningitis is the worst type because it can kill you. It often begins as an upper respiratory tract infection. From there it travels through your blood vessels to your brain. Then it can block up your blood vessels inside your brain triggering a stroke and brain damage.

Viral meningitis is the most common form. Usually viruses that enter your body through your mouth before going to your brain and multiplying cause it. You can find these viruses in the mucus, saliva and feces.
Other viruses that may cause meningitis include:
* Chicken pox
* Flu
* Mumps
* HIV
* Genital herpes

Anyone can catch meningitis. This is especially true if your immune system is weak.

Meningitis often begins like the flu does. You may get a rash. The major symptoms include:
* Running a sudden fever
* A severe headache
* Stiff neck
* Dislike of light

Bacterial meningitis must be treated quickly. Severe bacterial meningitis will require intravenous antibiotics. On the other hand, antibiotics cannot be used to treat viral meningitis because they do not kill viruses.

Whether you are having bacterial or viral meningitis, what would be best for yourself is to get plenty of rest and give your body a break. In the meantime, drink plenty of water to flush out the toxins and go easy on your diet. Do follow the recommendations by your doctor during this period. Your viral infection headache and other symptoms will start to subside as your body recovers.

Immobilienmakler Heidelberg

Makler Heidelberg

Immobilienmakler Heidelberg

Makler Heidelberg


Immobilienmakler Heidelberg

Makler Heidelberg


Der Immoblienmakler für Heidelberg Mannheim und Karlsruhe
Wir verkaufen für Verkäufer zu 100% kostenfrei
Schnell, zuverlässig und zum Höchstpreis


Source by Sandra Kim Leong

The Recipe for Creating a Viral Video Worthy of Massive Views


What is it about a video that makes it go viral? Of course, videos featuring celebrities easily generate thousands of views within days. However, for the video uploaded by the average Joe or Jane, it takes a certain attention-grabbing element for it to obtain views in blowout numbers.

Anyone has what it takes to make a video go viral, and it doesn’t require anything more than a few seconds of footage taken from a cellphone cam. While luck is involved to a degree, it is much more about providing content that viewers would deem worthy of sharing through social media and word-of-mouth.

Why Would Someone Watch Your Video in the First Place?

What are the motivations for watching a video on YouTube? While some may watch a video for informational purposes, more often, people watch a video to be entertained. Whether it is a slow day in the office or because they have nothing better to do at home, people watch short videos because they want to laugh, to feel inspired or simply be amazed. For a video to leave its mark, the viewers need to undergo any of the following:

1. Laugh from the belly

2. Feel heartwarming inspiration that causes tears to roll

3. Feel their jaw drop because they just saw something unbelievable and utterly amazing

4. Make them say to themselves “Is this for real?”

5. Make them go “awe” due to the sheer cuteness of the content

Think about viral videos on YouTube that don’t involve celebrities. They all involve to an extent one of those five elements. They are also so out of the norm that people can’t help but talk about them. Consider the following examples of videos that have gone viral and how they fit into the paradigm:

Kid Beethoven – This is a video of a young boy, no more than 10 years of age completely owning a piano at a Costco store as if he was Beethoven incarnate. Patrons passing by soon became mesmerized and began filming this child prodigy on their cellphone cams. This video clearly falls under the category of being unbelievable and utterly amazing.

Soldiers Returning Home – This one’s a real tear jerker and is a compilation of service members returning home from deployment and surprising their loved ones at home or school. Whether you can relate to the video or not, it is one that brings a tear to your eyes because it reminds one of the importance of family and the tremendous sacrifices our men and women in uniform endure.

In a day and age where just about anything can be captured on film, videos are all over the Web. The ones that happen to go viral are the ones that really pull on the human emotion. These are the ones that the viewers deem worthy of being shared and soon become Web sensations as a result.

Immobilienmakler Heidelberg

Makler Heidelberg

Immobilienmakler Heidelberg

Makler Heidelberg


Immobilienmakler Heidelberg

Makler Heidelberg


Der Immoblienmakler für Heidelberg Mannheim und Karlsruhe
Wir verkaufen für Verkäufer zu 100% kostenfrei
Schnell, zuverlässig und zum Höchstpreis


Source by Muyen Peng